Parkchester End of Bed
Automatic Motorized Flat Screen
TV Lift Cabinet
Beautifully finished, front & back, cabinet
with quiet, smooth electromechanical lift. Accommodates plasma and LCD
TVs up to 39.5 wide by 30 tall x 7" D.
Lift Cabinet Features
Lift System:
Patented and proprietary, our lift system is ultra smooth and quiet.
There are only 2 moving parts and the electronics are separate from the
lift itself. Has been tested for over 30,000 cycles with a 200 lb.
Weight. And is still going, and most importantly all our lifts carry the
UL approval. So the consumer buys with confidence. You can set the lift
at up and down stopping points to exactly fit your TV. Universal
Mounting System: Comes complete with the easy to follow instructions and
all the tools and screws needed for mounting all plasma and LCD flat
screens. Programmable stopping
of the lift at the correct up and down heights.
Unique Cable Management System:
Protects and manages wires while keeping the system neat, clean and
organized.
RF Wireless Remote Control:
Wireless remote and attached remote come with every unit. Also, we have incorporated an auxiliary on/
off and set control switch inside the cabinet in case the remote is not
handy.
|
Finish: Cherry
|
Cabinet Construction
English Dovetail Joints:
These joints, which are both front and back, strengthens the cabinets in
a way that separation becomes nearly impossible. Since this type of
joint becomes self-locking even before the glue is applied, an overall
solid construction can be guaranteed.
Solid Wood Construction:
A careful selection of the finest woods with all sides, tops and panels
matched for grain and color. Solid wood makes these cabinets as durable
as they are beautiful. Our cabinets are birch with different veneers,
which are auto-glued and attached by a pressing machine. All Theater Lift Cabinets will be kiln dried hard wood, hard wood
veneers and MDF no particle board.
Solid Wood Tongue and Groove Corner Blocks:
Incorporates the side panels of the cabinet with the foot of the cabinet
adding structural support.
Finishing Process:
Seven step finishing process to achieve the highest quality possible.
There is automated gluing of the wood and the veneer is attached using
an automated pressing machine. There are 5 coats of stain with 2 hrs. Of
drying time between each coat. Lastly, a clear coat finish is added.
Backs are finished and slide open for easy access to the components.
Cabinet Hinges - 4:
The hinges are screwed into four surfaces proving greater structural
support of the moving parts.
|
Free White Glove Ground Shipping
White Glove Deliveries: Your
shipment will be delivered into your
house unpacked for your inspection and the packaging taken away
Parkchester End of Bed Lift Cabinet
|
